Fire Suppression

ecarologoECARO-25® Clean Agent Fire Suppression System

Superior, Cost-Effective Clean Agent Fire Protection

Water-based fire suppression systems (sprinklers) are designed to protect people and structures. But when it comes to protecting high value machinery, computers and other electronic equipment, water can be more damaging than the fire itself! An ECARO-25® clean agent fire suppression system is the superior, cost-effective choice for protecting electronics and high-value assets – reducing the threat of needless downtime and business interruption. Less Clean Agent Fike’s ECARO-25 clean agent fire protection system requires 20% less clean agent per cubic foot/meter than HFC-227 ea or FM-200® fire suppression systems and an incredible 38% less clean agent than FK-5-1-12 – that’s a significant cost savings. ecaro2

More Efficient In addition, the superior physical properties of Dupont™ FE-25™, the clean agent used in the ECARO-25 system, allow you to utilize small diameter piping over long distances, making the clean agent pipe network design much easier and less expensive. And ECARO-25 is 15% more efficient in hold time than a HFC-227 ea or FM-200 fire suppression systems, and 25% more efficient than a FK-5-1-12 system.


halonHFC-227ea Clean Agent Fire Suppression System™

• Even one day lost to fire-related downtime can result in lost revenues, customers and profits. A Fike HFC-227ea Clean Agent Fire Suppression System provides an economical, environmentally acceptable solution for your fire protection needs. Fike’s HFC-227ea (also known as FM-200™, a registered trademark of Great Lakes Chemical Corporation, or as Dupont’s FE-227™), extinguishes a fire quickly by discharging in 10 seconds or less! This effective fire protection agent discharges as a gas, leaving behind no residue and doesn’t require costly clean up, unlike sprinklers or other systems. Fike’s< © patented rupture disc valve design offers additional flexibility, effectiveness and speed in the system design – translating into minimal damage and little business interruption. Fike’s HFC-227 ea Clean Agent Fire Suppression Systems are great in applications ranging from telecommunications and data processing to switch gear rooms, military applications and cell sites to high-tech medical applications. With a Fike designed fire protection system, utilizing HFC-227ea count on:

  • Zero ozone depleting potential
  • Low global warming potential
  • Short atmospheric lifetime
  • Safe for occupied areas
  • Requires minimal container storage space
  • Full line of listings and approvals
  • Best warranty in the fire protection industry
  • Complete range of containers
  • Extensive line of fire protection accessories
  • Simplified Installation
  • ISO 9001 Certified

Fike can provide the system components and accessories to meet your complete clean agent fire suppression system requirements. Sophisticated control panels, delayed action devices, warning signs, manual releasing devices, automatic detection, and warning devices are also available from Fike. Download the HFC-227ea manual.


fm200

FM-200 Clean Agent

Even one day lost to fire-related downtime can result in lost revenue, customers, and profits. A Fike HFC-227ea Clean Agent Fire Suppression System provides an economical, environmentally acceptable solution for your fire protection needs.

Fike’s HFC-227ea (also known as FM-200, a registered Trademark of Great Lakes Chemical Corporation, or as Dupont’s FE-227), extinguishes a fire quickly by discharging in 10 seconds or less! This effective fire protection agent discharges as a gas, leaving behind no residue and doesn’t require costly cleanup, unlike sprinklers or other systems. Fike’s patented rupture disc valve design offers additional flexibility, effectiveness and speed in the system design – translating to minimal damage and little business interruption.

Fike’s HFC-227ea Clean Agent Fire Suppression Systems are great in applications ranging from telecommunications and data processing to switch gear rooms, military applications and cel sites to high-tech medical applications. With a Fike designed fire protection system, utilizing HFC-227ea count on:

  • Zero ozone depleting potential
  • Low Global warming potential
  • Short atmospheric lifetime
  • Safe for occupied areas
  • Requires minimal container storage space
  • Full line of listings and approvals
  • Best warranty in the fire protection industry
  • Complete range of containers
  • Extensive line of fire protection accessories
  • Simplified installation
  • ISO 9001 Certified

Fike can provide the system components and accessories to meet your complete clean agent fire suppression system requirements. Sophisticated control panels, delayed action devices, warning signs, manual releasing devices, automatic detection, and warning devices are also available from Fike. Download the HFC-227ea manual.


ProInert Inert Gast Fire Suppression System – The most cost-effective inert gas system

The Complete Package Since its European introduction in 2003, Fike’s innovative ProInert® has become widely accepted as one of the best performing, most cost-effective, and environmentally friendly inert gas fire extinguishing systems. Now that same technology is available in the United States, and other parts of the world requiring UL and FM approval. Fike’s ProInert offers all the benefits of other inert gas systems with several significant design improvements – enhancements that not only mean a superior product, but savings to your bottom line! Most inert gas systems discharge from the nozzle into the protected space with a high surge flow rate, creating a hazardous pressure peak. These systems use pressure reducers further down the pipe network in order to mitigate safety issues, but also require both high-pressure and low-pressure piping.

http://youtu.be/bF22J1degbM


co2b

Carbon Dioxide Gas System

Carbon dioxide or CO2 is a colorless, odorless, electrically non-conductive gas…that’s highly efficient as a fire suppression agent. Fike Carbon Dioxide fire protection systems use intelligent, reliable and fast-acting control panels to quickly sense a fire before it can cause damage to property. Carbon dioxide gas has a high rate of expansion, which allows a Fike CO2 fire protection system to work fast. When applied to a fire, CO2 provides a heavy blanket of gas that reduces the oxygen level to a point where combustion cannot occur. Since carbon dioxide is a gas, there is no clean-up associated with a Fike CO2 fire suppression system discharge…that’s minimal interruption to your business! In fact, the cost of clean-up and peripheral damage associated with water sprinkler systems, foam systems, and dry chemical agents can exceed the costs associated with the actual fire damage. co2aWith a Fike Carbon Dioxide system, clean up costs and downtime associated with a CO2 discharge are negligible.Fike’s CO2 fire suppression system is extremely versatile, effective on a wide range of flammable and combustible materials and approved for Class A, B, and C hazards. Fike Carbon Dioxide fire protection systems are available for use in total flooding or local fire protection applications – making it an effective fire protection system for a wide variety of hazards. Download the Fike Carbon Dioxide Fire Suppression Info Sheet


9e8f949206fb6612385bc47e56466a90

Fire/Room Integrity Testing

Retrotec is the world’s leading manufacturer of blower door equipment, digital manometers, duct leakage test equipment, blower door testing software, and other tools for measuring building envelope performance.


micromist

Micro Water Mist

The Fike Micromist® fire suppression system produces a fine mist to extinguish fires quickly, with very little residual water. In fact, the Micromist system releases 100 times less water than traditional sprinkler systems, yet effectively extinguishes the fire! That translates into less run-off, less damage and easy clean-up. 4d72df47f90709541f201eca79b19cd0_gblz The Fike Micromist fire protection system employs single fluid, intermediate pressure – which reduces installation and maintenance costs associated with redundant and high-pressure piping networks / fittings. Offered in two convenient cylinder size configurations, Micromist is a self-contained (great for applications with or without an available water source), single-fluid, pre-engineered water mist fire suppression system and comes pre-assembled, tested and packaged with all necessary valves and actuation components for system operation, (system nozzles must be ordered separately). That’s portability, reliability and simple installation in one easy package! fire suppression cheetah In addition, the Fike Micromist system does utilize water, so it is naturally environmentally safe, non-toxic, and people friendly. Combine Micromist with the intelligent, peer-to-peer speed of the Cheetah Xi detection and control system and you have a cost-effective, fast fire protection system, ideally suited for total compartment protection of machinery spaces, compartmentalized gas turbine generators (FM approved) and many other applications. Click here to read the Micro Mist data sheet.


86dde74ad4fb5f9a5e81a947c4d75957

Industrial Dry Chemical

The Kidde IND™ Dry Chemical System, provides 24-hour fire protection for a wide variety of industrial processes, equipment, machinery and paint spray booth applications. The system has the choice of two dry chemical agents effective on Class A, B and C fires. Total flooding or local application design options. The system includes detectors, a control unit, agent storage cylinders, piping and discharge nozzles. industrial dry chemical kiddeBenefits: • Easy to design • Safe and reliable fire protection • Flexible installation parameters

Listings/Approvals:
• Underwriters Laboratories, Inc. (UL 1254) Listed
• Underwriters Laboratories of Canada (ULC/ORD 1254.6) Listed
• NYC MEA Approved

Technical Specifications:
• Two types of dry chemical – Multi-purpose and Standard
• Six cylinders sizes
• Proven controls and detection
• Variety of actuation options Click here to read the Kiddle Fire Systems info sheet.


kidde commercial fire suppressionRestaurant UL300 Fire Systems

The Kidde WHDR™ Wet Chemical System offers 24-hour automatic or manual protection for commercial cooking areas; ducts, plenums, hoods and cooking surfaces. Wet chemical agent designed for quicker flame knockdown and faster suppression. Exceeds stringent UL 300 standard and complies with NFPA Standards 96 and 17A. Offers unmatched coverage, with fewer discharge nozzles and flow points, meaning reduced installation time and cost.

Features:
• Safe and reliable fire protection
• Ease of design and flexibility of installation
• Flexibility and reliability of important safety system

Listings/Approvals:
• Underwriters Laboratories, Inc. (UL 300) Listed
• Underwriters Laboratories of Canada (ULC/ORD-C1254.6) Listed
• NYC MEA Approved
• American Bureau of Shipping (Type Approval)
• Det Norske Veritas (Type Appproval)
• ISO 15371Technical Specifications:
• APC provides fastest flame knockdown and best securement
• Four cylinder sizes available
• Proven controls and detection Click here to read the Kidde wet chemical info sheet.